Product features: Designed using original factory data, directly and accurately attached to the main beam,
fixed in place using original beam screws. After installation, it can effectively improve the simulation degree of the vehicle,
and the internal components on the inner side of the rear wheel arch are not exposed.
At the same time, multiple sets of screw fixing positions are reserved on the top of the mudguard,
providing more gameplay for later modifications.

1. The material is tough resin, and the product size is relatively large. If it is subjected to long-term compression during transportation.
Deformation may occur. If it occurs, pour 60-80% warm water over the deformed area for 5-8 seconds,
then use external force to break it back into the correct shape and wait for it to cool. This will restore and maintain the correct shape.
2. 3D printing technology production. Due to inconsistent batches, there may be printing textures and a small amount of printing
treatment water stains on the surface of the components (this issue cannot be returned as a product problem).

Users with higher requirements can sand it with sandpaper or paint. 
3. Due to different batches of printed products, there may be design adjustments between batches.
If the adjustment range is small and the difference in picture display is small,

no separate photo display notice will be taken (the adjustment range will be described separately). 
4. The strength of 3D printing materials can meet the basic product usage scenarios,
but there is a small probability of product fracture and damage caused by high-speed collisions and tabletop drops.
Please do not use them violently.
The position of the fixing screw can refer to the illustration at the end of the page.