TRX-4 Front and Rear Car Shell Hidden Lock Can Open Cover Semi-car Pickup Com…

GRC for Traxxas TRX-4 Front and Rear Car Shell Hidden Lock Can Open Cover Modification Parts Semi-car Pickup Components G156C

GRC TRX4 front and rear shell quick release hidden lock

Introduction:

This kit is only suitable for Traxxas TRX-4 Defender with modified GRC front and rear wheel covers (#G156A G156B).

The front latch requires the hood to be cut in order to use it. It is a modified part for the openable cover.

The rear lock is directly installed in the original shell and is ready to use. At the same time, it is also one of the components of the TRX-4 Defender modified pickup (half card).

This kit can replace the R-buckle fixing method of the original car shell column. It adopts a fast hidden lock design. The kit is built and hidden at the front end of the car cover and the tailgate. Push-pull the lock bar to lock-unlock. Car shell, convenient and fast.

Material: engineering plastic

Installation: original factory corresponding screws

Applicable to: TRX-4 guards have changed the GRC front and rear wheel covers (#G156A G156B) models

Serial number: G156C

Total weight: 45g

Precautions:

1. The kit is only suitable for the TRX4 Land Rover Defender’s original car shell, and the GRC front wheel cover #G156A and rear wheel cover #G156B kits need to be installed before it can be used.

2. If there is a front kit installed, and a motor front kit is also installed, this kit can also be installed.

Product List:

Quick release hidden lock of the car shell and front and rear wheel covers, use instructions:

Design Interpretation: Replace the original car shell column and R buckle, the quick-release hidden lock kit is fixed in the car shell, and the quick-release design is adopted between the lock seat of the mudguard on the frame, and the “push-pull” means The body can be “lock-open”. The whole kit is cleverly hidden in the hidden structure of the body, which is convenient and practical without affecting the simulation effect.

Front bracket loading and function indication: (Hidden installation in the car shell, directly fixed by the hole of the lamp cup holder)

After the car shell is installed in the frame, the car shell can be quickly locked through the L-shaped lock in the kit

The engine simulation kit for #G156E Defender can be installed:

Front lock kits are also available for users with GRC motor front mounted:

Rear bracket loading and function indication:

(Hidden installed in the car shell, directly fixed by the holes of the original car spare tire)

After the car shell is installed in the frame, the car shell can be quickly locked through the sliding lock at the bottom of the kit:

This kit can still be used after changing the semi-cartridge shell:

Installation instructions:

The front lock buckle is snapped into the bracket and fixed with the corresponding screws. Tighten properly to ensure that the lock can slide

.

The installed bracket is directly fixed on the base of the headlight cup of the car shell with the original screw 2576. If you need to use the hood openable function, you can install a magnet of the corresponding specification. (The hood can be opened, and you need to cut it by yourself. Please evaluate your personal ability before deciding whether to install it)

Insert the rear bracket lock into the reserved slot of the G156B rear mudguard:

The rear lock bracket is installed in the car shell and fixed with the original spare tire seat and roll cage using the original screws 3236/3215. Double-sided tape can be pasted between the car shell and the bracket to increase the strength (optional).

installation manual: