Name: RC simulation Axial Wraith exhaust pipe model
SKU: 12233
Availability: InStock

Description



GRC RC simulation Axial Wraith exhaust pipe model
Axial Wraith 90018 90020 90031 90045 90056 Applicable
This product is formed by 3D printing and made of PLA plastic.
V10 silver exhaust pipe
Product list: two silver 5-hole exhaust pipes, four M2.5*10 stainless steel screws, ten 3mm red LED lamp beads, and a resistor.
V12 silver exhaust pipe
Product list: two silver 6-hole exhaust pipes, four M2.5*10 stainless steel screws, 12 3mm red LED lamp beads, and a resistor.
Note: The silver exhaust pipe of V10 and V12 is that the plastic color of the exhaust pipe itself is silver, not the silver of the plastic parts after spraying, so the surface of the silver exhaust pipe has lines, you can use Tamiya and Junshi water to fill it first. Cover with soil sprinkler lacquer, and then use Tamiya silver lacquer to color it.


 



Frequently Asked Questions:
1. How many lamp beads can be installed in the exhaust pipe?
Answer: Only 3mm straw hat LED lamp beads can be installed, and 5mm needs to be installed with a DIY hole opener for reaming, but 5mm lamp beads are not recommended.
2. What should be paid attention to when welding the exhaust pipe?
Answer: First install the lamp beads into the tube position, and fold the pins before welding. After installation, you can coat the led pins with black silicon 704 glue for routing.
3. Where does the lamp group get electricity and voltage?
Answer: According to the lamp beads and resistors provided by the factory, the power can be directly taken from the receiver, and the power supply voltage is 5v~6v.
4. What should be paid attention to when the exhaust pipe is sprayed with soil paint?
Answer: If there is a slight pitting or wire drawing on the surface, clean it up first, insert a bamboo stick into the tube and fix it before spraying paint.


V10 silver exhaust pipe
(note: the silver original is not painted)



V12 silver exhaust pipe
(note: the silver original is not painted)



The following loading display, the products sold do not contain decorative exhibits such as frame.
The white exhaust pipe of V10 is sprayed with silver paint and equipped with a red light set to simulate a real car and explode with fire on the throttle:



The exhaust pipe of the new lamp group can be equipped with an LED lamp group, which can be plugged in to receive electricity or independently supply 5~6V, and it can be “fire-breathing” with one button.



V10 white exhaust pipe loading effect:



White exhaust pipe sprayed with silver paint and loading effect:



(Vehicle cross section) Installation drawing:



With red LED light bead installation diagram