Motor Cooling Fan For 1:10 Simulation Engine Hood Radiator F11 V8 2S/3S DIY

GRC 1/10 T4 Simulation Engine Hood Radiator F11 V8 2S/3S Motor Cooling Fan DIY Retrofit Upgrade OP Accessories GAX0097A/B

GRC Simulation Engine Radiator F11 V8

Introduction: GRC simulation engine radiator, high-detailed V8 engine upper appearance, not only has a simulated shape, but also has a simulated air intake design. Built-in temperature control 13000 rpm high-speed dual fans to dissipate heat for the motor. The built-in fan can effectively prevent the damage of the fan caused by flying stones when the vehicle is walking. The simulated radiator is directly stuck on the motor, making the interior of the vehicle more simulated. Total weight: 89g.

Applicable: Most 1:10 RC models with 36mm diameter motor series installed.

Color classification: 2S version 7.6V/GAX0097B 3S version 11.1V/GAX0097A

Material: The main frame is aluminum alloy, and the upper mask is plastic.

Fan parameters: 2S version 7.6v, rated at 13000 rpm. 3S version 11.1v, rated at 13000 rpm.

Introduction to the thermostat: The power-on working temperature is 50°C±5°C, and the reset temperature is 35°C±5°C. After the power is turned on, the fan will not start, and the fan will only start after the motor has warmed up to control the working temperature.

Note: choose 2S/3S voltage version according to specific electricity standards. When wiring, pay attention to distinguish between positive and negative poles. The default way of taking electricity: JST plug.