Interior Body Shell Cab Seat Kit for 1/10 RC Crawler Traxxas TRX4 G500 TRX6 G6

A set of product list:

This kit does not include a fan:

Product display: (shipped as spare parts need to be assembled by yourself)

Product function details display:

Simulation proportional central control, air outlet, linkage steering wheel

Openable glove box
Movable gear

Brake, accelerator pedal

Featured design of the kit 1: Can install a motor/ESC cooling fan:

Feature design of the kit 2: The interior outsole has the use window of the original ESC switch, and GRC TRX4 ESC switch can be added at the same time; the installation position of the original G63 lamp group is also reserved. Featured design of the kit 3: There is also a seat quick release design and four adjustable angles;

Featured design of the kit 4: (Note: A certain hands-on ability is required, and players can use their creativity to realize this function.)

Loading display: (Puppets and frames are for display only and are not included in the product

This kit can also be installed when the motor is in front:

All four seats ensure proper legroom

Note: The proportion of the doll in the picture is 6-7 inches movable, and the standing height of the doll is about 15.8-17.5cm

GRC Mercedes-Benz interior + GRC TRX6 multifunctional rear bucket:

Installation instructions: (Need to prepare your own glue during installation)

Installation instructions: (Need to prepare your own glue during installation)
1. Frame preparation:
1. Adjust the antenna position.
2. Fix the original light control to the GRC interior outsole. (G63 model)
3. Remove four screws on each side pedal.
4. Arrange the motor ESC wiring (very important).
2. Car shell preparation:
1. Make proper cuts on the rear view mirror mounting cylinder.
2. Remove the wiper blade and fix it in other ways.
3. Remove the bracket of the original hub, move the hub up, and use 3M adhesive. (G63 model)
4. Replace the original curved R buckle fixed with the rearview mirror with a conventional 3MM straight R buckle. (The R buckle of the 6mm car shell is too thick to fit into the mounting hole of the rearview mirror)
5. Cut off part of the hub mounting screw.

Graphic manual:

Tip 1: (The length of the original ESC power cord is limited) Extending the power cord of the ESC will be more conducive to the opening and closing of the battery cover and a better user experience.
Tip 2: When opening and closing the battery cover, make sure that the gear lever is in the R position