1/10 RC 1976 model simulation V8 engine hood fan radiator F76 motor radiator

$39.99

SKU: RC12@US02 Category:

Description

1/10 RC 1976 model simulation V8 engine hood fan radiator F76 motor radiator

Introduction: High-detailed appearance of the 1976 427 SOHC engine, built-in 13000 rpm dual fan, heat dissipation for the motor, no temperature sensor, standard JST plug, plug and turn. The product is a KIT kit, which requires a certain amount of hands-on ability to assemble it by yourself.


Material: The main body is aluminum alloy, and the upper part is temperature-resistant plastic + soft rubber
Application: 36mm motor, 2s~3s general purpose.
Fan parameters: 9v rated at 13000 rpm.
Number: G164AS
Total weight: 110 g
Note: For mountain axe AXE 540 and 550, a special base must be purchased separately.

Product display:

KIT needs to be assembled by buyer

Product display:

Simulation air intake design:

Schematic description of product application:

Different components correspond to different installation sizes. Users can choose the corresponding components according to the specific use environment.

The F76 model comes standard with a 3mm adjusting piece, which can be converted to the overall installation height of the kit. The user can choose whether to install or not according to the specific assembly environment:

Motor applicable specifications:

Motor installation effect display

(motor is only a display, not included in the product):

The exhaust pipe assembly adopts a quick-release design, which can be flexibly adapted to different scenarios.

Installation instructions: pay attention to distinguish between left and right

When installing the flexible cord, measure the required length and cut a sharp corner obliquely, which is more convenient for installation.

Display of loading effect (vehicles are for display purposes only, not included in this product):

Note: The exhaust pipe kit cannot be installed in the motor position of some models. If you use it in this position, please remove the exhaust pipe.

Appreciation of the effect of real car engine compartment:

The simulation details are refined:

TRX-4 series models with GRC TRX4 G2 motor front gearbox kit will achieve the perfect simulation effect

To install the motor front kit, users need to purchase GRC adjustable suspension bracket GAX0149F to install

(BRONCO/Sports/Benz G/models need to partially cut off the inside of the front fender to install the exhaust pipe, please evaluate by yourself whether to install it ) GAX0149F

Changes in the overall layout of T4 models:

Note: The total height of this fan is slightly higher than that of F11. The height of the hood of the T4 Guardian car shell is low. If you need to use the Guardian car shell, you need to raise the car shell or remove the circular air filter.

Installation reference instructions: This fan is a KIT kit and requires a certain amount of hands-on ability.

Instructions for locking the fan:

Do not lock the fan by adding screws to avoid the deformation of the fan bracket and cause the fan to not rotate

Additional information

Age Level

Brand

Compatible Brand

Compatible Fuel Type

Compatible Scale

Compatible Vehicle Type

Custom Bundle

Model

Modified Item

MPN

Type

Color

,

Related products